Frameless Glass Walls

This frameless glass partition wall comes with a series of individual toughened glass panels with top and bottom clamping profiles.

Frameless Glass Walls

Product Overview

This frameless glass partition wall comes with a series of individual toughened glass panels with top and bottom clamping profiles. These panels suspended slide along a ceiling track without floor track. They are pushed together and interlocked to form a wall. Each panel can be individually locked and moved to ensure a high level of security. In addition, only the clip on the top and bottom of glass are required to fix the glass panels, which accordingly maximizes the glass area. When the product is positioned, the floor pins locking and supporting edges of panel can keep the panels.

●Aluminum track

-Clip-on ceiling trim available

●Aluminum profile 100×35mm


-Sliver anodized

-Powder coating

-Stainless steel covering

-Decorative coating


-Hardened safety glass 10mm OR 12mm

ned+L-Hardeaminated 5mm+5mm


- Clear, Bronze, Grey, Opaque Etc.

-Sand blasting

-Silk printing

-Special painting

General DescriptionGlass partition walls are suspended from overhead tracks – no floor tracks or guides are needed. Floor pins are required to keep the panels secure in the opening.
FrameworkA pre-finished 100mm length aluminium clip on top and bottom
Partitions Panel10mmOR 12mm toughened safety glass
Glass TolerancesToughened glass cannot be supplied completely flat. The maximum permitted deviation from a straight line is 0.30% (3mm per metre run) measured across the full pane of glass on the concave surface and in the vertical plane and supported at all four edges. 3mm – 5mm vertical edge tolerance to frameless glass doors assuming a flat and level floor and ceiling.  This tolerance may be increased subject to prevailing site conditions.
Panel JointClear dry pvc joint.
ManifestationA wide range of film manifestation and screen printing available as optional extra.
Module700mm - 1200mm maximum.
HeightUp to 3000mm.
Tolerance+ / - 5mm.
Weight30.00Kg/m2 for 12mm glass.
FinishesSatin anodized or polyester powder coating to all exposed aluminium components available in a wide range of colors as standard.
Door FurnitureSatin stainless steel handle and hinge. Additional finishes and levers are available as optional extra.

Frameless Glass Walls

Frameless Glass Wall Structure

Frameless Glass Walls


Tel.: +86 159 0182 2516


WhatsApp: +86 159 0182 2516

Factory Add: Zhongyi Industrial Zone,Panyu District,Guangzhou,China

Office: No.8 Dongfang Road,Pudong New Area,Shanghai,China


Key word: Partition Wall
Copyright © SHANGAHI GIBO STAR INTERNATIONAL TRADE CO., LTD. All Rights Reserved | Sitemap | Powered by